A full Scottish breakfast is just like a full English breakfast, except it comes with black pudding, lorne sausage, and tattie scones. Haggis is sometimes included, as is white pudding (similar to black pudding but with the blood substituted for fat). Tattie scones may be bland to some, but serve them with lashings of butter and you’re good to go. Expect to leave the table feeling full and content. Late night? Most places in Scotland serve this hearty breakfast all day long.
July 7, 2022
John Boyd Dunlop (born Feb. 5 1840, Dreghorn, Ayrshire, Scot.—died Oct. 23 1921, Dublin), inventor who developed the pneumatic rubber tire. In 1867 he settled in Belfast as a veterinary surgeon. In 1887 he constructed there a pneumatic tire for his son’s tricycle. Patented the following year, the tire went into commercial production in 1890, with Dunlop holding 1,500 shares of the Belfast manufacturing company that developed into the Dunlop Company.
It was later discovered that the principle of the pneumatic tire had already been patented in 1846. The company held various accessory patents, however, that enabled it to establish its position.
Though invented as an improvement on the bicycle, the pneumatic tire arrived on the scene just in time to contribute to the success of the automobile.
The company has been involved in rubber-tire manufacture since the late 19th century. Dunlop’s founder, John Boyd Dunlop (1840–1921), who had constructed the first pneumatic (air-filled) tire, received a patent for the tire in 1888. The following year he formed a company to manufacture pneumatic bicycle tires. In 1896 Dunlop registered the company in Great Britain as Byrne Brothers India Rubber Company, Ltd. The name was changed to Dunlop Rubber Company, Ltd., in 1900, and the company began making automobile tires six years later. To ensure that the company would have an uninterrupted supply of raw rubber, Dunlop started buying rubber plantations on the Malay Peninsula, and by 1926 the company held the largest acreage under one ownership anywhere in the British Empire. In 1981, however, the company sold its holdings there to Malaysian investors. That same year the company converted to a public limited company and assumed its current name.
In 1982 Dunlop sold a large portion of its European tire operations to Sumitomo Rubber Industries, Inc., of Japan—an associate company and former Dunlop subsidiary. BTR PLC, an industrial holding company, acquired Dunlop in 1985, selling off Dunlop’s American tire company.
Types of tires.
There are two main types of tires, those made of metal and those made of rubber. Railroad cars, which run on smooth steel rails, use iron or steel tires for low rolling resistance. The metal tire is basically a flat hoop fitted tightly over the exterior of the wheel. Besides low rolling resistance, its other attributes are strength, durability, and resistance to wear.
Free-moving vehicles such as automobiles, trucks, buses, bicycles, and airplanes need more friction to turn, climb, accelerate, and brake, so these vehicles use rubber tires, which provide both high friction and some cushioning ability. Rubber tires are of two types: (1) solid, or cushion, tires, in which the rubber portion functions to carry the load, absorb shocks, and resist cutting and abrasion; and (2) pneumatic tires, in which the load is carried and the shocks are absorbed mainly by the compressed air that fills the tire. Pneumatic tires are now used for almost all free-moving vehicles because of their greater cushioning ability and other advantages. Solid rubber tires are now used only on industrial and farm carts and on military vehicles, applications where tires are liable to be cut or pierced.
Solid rubber tires were introduced in 1881 on the wheels of hansom cabs in London. They were formerly used for many types of road vehicles, but they have now disappeared from highways owing to legislation that discouraged their use because they were hard on roads. The large sizes were supplanted by large pneumatic tires (truck and bus casings), but small solid tires came to be used extensively on industrial trucks and tractors and on carts. Solid tires are often adhered directly to the wheel or to a metal band applied to the periphery of the wheel.
The pneumatic tire is designed to provide a flexible cover with an impermeable lining to contain and restrain the compressed air. This cover is provided with a rubber tread portion that is designed to withstand the cutting and abrasive wear of road contact and to protect the tire against puncture and loss of air. Such a structure has, as distinct from a solid rubber or cushion tire, no capacity in itself either to carry load or absorb shocks. It is entirely dependent on the contained compressed air to enable it to function.
The first patent for a pneumatic tire was issued to Robert William Thomson in England in 1845 for a hollow leather tire filled with air. Although a set of Thomson’s “Aerial Wheels” ran for 1,200 miles on an English brougham, the same inventor’s solid-rubber tires were more popular; and thus, for almost half a century, air-filled tires were forgotten. The growing popularity of the bicycle in the late 19th century revived interest in tire design, and in 1888 John Boyd Dunlop, a veterinary surgeon of Belfast, obtained patents on a pneumatic tire for bicycles. Pneumatic tires were first applied to motor vehicles by the French rubber manufacturer Michelin & Cie. For more than 60 years, pneumatic tires had inner tubes to contain the compressed air and outer casings to protect the inner tubes and provide traction. In the 1950s, however, tubeless tires reinforced by alternating plies, or layers, of cord became standard equipment on new automobiles. In that decade Michelin introduced the radial-ply tire, which is now standard for all automobiles in developed countries.
Pneumatic tires are usually retained on the wheel through the use of beads (hoops of wire) that are molded into the tire edges. The tire edges are placed in a shaped channel on the wheel rim’s circumference and are held firmly against the channel’s edges by the pressure exerted once the tire is inflated with air. Pressures range from about 30 pounds per square inch (200 kilopascals) for large, soft tires to approximately 100 pounds per square inch (700 kilopascals) for high-pressure, high-load applications. The pressure is carried by layers of cords embedded in a rubber cover that in turn serves to contain the air, protect the cords, and give high friction with the ground. This felicitous combination is the reason why pneumatic tires are so widely used for transportation. More than 200 million of them are manufactured for motor vehicles alone each year, 90 percent for automobiles and 10 percent for trucks.
Pneumatic tires are designed to meet five main goals: low rolling resistance, low vertical stiffness (to cushion the ride), high sliding friction in both wet and dry conditions, high longitudinal and lateral stiffness (to minimize sliding motions in the “contact patch” where the tread meets the road), and resistance to wear and damage such as cutting, puncturing, and abrasion. In order to achieve these goals, tire designers must choose appropriate combinations of materials and structures, such as those described below.
A pneumatic tire is reinforced by layers of relatively inextensible cords that hold the air pressure and restrict deformation and growth of the tire during use. To this end cord materials must have high stiffness, resistance to repeated flexing, high strength-to-weight ratio, and good adhesion to rubber. Tire cords have been made of cotton, rayon, nylon, polyester, and glass, but steel and polyaramid (an extremely hard and stiff synthetic fibre) are currently the dominant materials in use.
Various rubber compounds are used in different parts of the tire. The liner, which is intended to minimize the loss of air, is usually made of butyl rubber because that material has a low permeability to gas. Sidewalls, on the other hand, must resist scraping, flexing, and attack by ozone in the air. A typical formulation for sidewalls (measured in parts by weight of each ingredient) would be 50 parts natural rubber (for resistance to heat buildup), 50 parts butadiene rubber (for abrasion resistance), and 50 parts carbon black (for reinforcement), along with small amounts of processing oil, antioxidant, and protective wax. A tire’s treads must be especially resistant to abrasion. A tread compound might have no natural rubber at all but rather 65 parts styrene-butadiene rubber (for hardness and abrasion resistance), 35 parts butadiene rubber, and as much as 65 parts carbon black.
Tires made to North American and European standards carry a code that shows their size and expected performance. In the American “P-metric” system, tire size is indicated, for example, by the code P215/70R15, where the letter P denotes a passenger-vehicle tire; 215 denotes the tire width in millimetres; 70 denotes the aspect ratio, i.e., the ratio of the tire’s height from rim to tread, relative to its width; R denotes radial construction; and 15 is the wheel rim diameter in inches. In addition to size, a speed rating is given using a letter code: S for a maximum speed of 112 miles per hour (180 km/h); T for 118 mph; H for 130 mph; V for 149 mph; and Z for more than 149 mph. A tread wear rating is given for expected tread life as a percentage of that for a standard tire. For example, a rating of 300 would imply a tread life three times as long as that of the reference tire.
Snow tires have an extra-deep tread for better traction on snow and ice. They are reputed to have 50 percent more pulling ability than regular tires on loosely packed snow and nearly 30 percent more on glare ice. In stopping on glare ice, however, snow tires have no advantage over regular tires; tire chains or studded tires are best for ice surfaces. Studded tires usually have about 100 studs tipped with tungsten carbide which contact the road as the tire rotates. Because of the damage they are said to cause road surfaces, they are prohibited in certain localities.